Using Mass Scan to see what tags you have

Using Mass Scan to see what tags you have

If you want to scan more than one tag at a time to see what they are, follow these steps:
  1. On the scanner, go to "Touch Scan"
  2. Choose "Mass Scan"
  3. Set your status
  4. Set power level
  5. Scan your tags
  6. Tap "Post Scans". Once you tap "Post Scans" it will show you what all of the items are that you just scanned.
  7. When you are done, tap "Complete" and "Sync Scans". 

    • Related Articles

    • RFID Troubleshooting Guide: Tags Not Scanning Properly

      Overview: If your RFID tags are not scanning properly, follow this troubleshooting guide to quickly diagnose and resolve common issues. 1. Verify Tag Placement Ensure tags are attached to a flat, non-metallic surface if using standard RFID tags. If ...
    • In Mass Scan, how can I see the list of information that I scanned?

      Press "Post Scans". Once you do that, if you have items you do not want, you can delete them before you press "submit" and then "Sync Scan".
    • When I post the scans from mass scan and hit complete, will that change the status?

      As far as the mass scans go, simply hitting "Post Scans" will NOT change the status of your items. This will just allow you to view them. If you do not wish to change the status of your items after you hit Post Scans, DO NOT hit "Complete" or "Sync ...
    • How to reprogram an RFID tag using the 123RFID app

      Step 1 – Launch 123RFID Mobile From the MC3330xR Home screen, tap Apps or swipe up to see installed apps. Open 123RFID Mobile. Confirm the reader is active (the app will show connection status at the top). Step 2 – Inventory the Tags Tap Inventory to ...
    • How To Attach RFID Tags To Tents

      Attaching RFID tags to tents Our friends at Fred's show you how to install an RFID tag. Recommended Materials Tent Repair Tape This tent repair vinyl is sold in three different materials and has an adhesive back. We recommend purchasing all or the ...