Instructions & Troubleshooting
Install SIM card in Janam RFID Scanner
Unlock the handle so it will slide off XR2 lock button Slide cover off Janam XR2 battery Remove Battery anam XR2 battery removal Pull out SIM card Tray & install SIM card as shown Janam XR2 SIM card
How To Update Firmware
RFD40 / RFD90 FIRMWARE UPDATE INSTRUCTIONS STEP 1: Confirm your current firmware version by opening up 123RFID > Select the hamburger menu in the top left of the screen > Select Firmware Update and it will show you the current firmware on your ...
Why is my scanner not scanning RFID tags?
If your scanner is not scanning RFID tags try these fixes: Make sure that your battery power level is above 10% Go to the 123 RFID app on your scanner (see image below) Go to settings Select RFID Select Regulatory and make sure that under Region it ...
How to Setup a Printer (printing from your handheld device)
Each handheld device can be setup to print to one printer at a time. These settings are stored with each user's log in profile on that specific device. The below list is a list that has been tested with the Easy RFID Pro operating on an Android ...
How to Change Pin Code
To change the pin code on your scanner, you will need to first remove the existing pin and then add it back. To do this, follow these steps: Go to SETTINGS>>SECURITY>>SCREEN LOCK Select NONE>>YES>>REMOVE Go back and then instead of selecting none ...
How do I reconnect my mobile printer to my handheld device?
STEP 1: Press the TOUCH SCAN button at the bottom of the screen STEP 2: Select SET PRINTER STEP 3: Turn on the printer STEP 4: Flip over the printer and locate the Bluetooth bar code STEP 5: Scan the barcode with your RFID ...
MC333XR Scanner Setup Instructions
STEP 1: Attach the battery to the scanner STEP 2: Power the device on by pressing the red button in the lower right corner STEP 3: Connect to your WiFi network by holding down the WiFi symbol in the upper right corner of the screen ...
ZQ630 Mobile Printer Setup Instructions
Step 1 - Insert the battery. Step 2 - Open the protective cover on the printer and plug in the power cable. Step 3 - Open the printer to install the roll of labels. Step 4 - Pull the media supports apart and insert label roll, then close the lid and ...