Install SIM card in Janam RFID Scanner
Unlock the handle so it will slide off
Slide cover off
Remove Battery
Pull out SIM card Tray & install SIM card as shown
Related Articles
RFID Troubleshooting Guide: Tags Not Scanning Properly
Overview: If your RFID tags are not scanning properly, follow this troubleshooting guide to quickly diagnose and resolve common issues. 1. Verify Tag Placement Ensure tags are attached to a flat, non-metallic surface if using standard RFID tags. If ...Why is my scanner not scanning RFID tags?
If your scanner is not scanning RFID tags try these fixes: Make sure that your battery power level is above 10% Go to the 123 RFID app on your scanner (see image below) Go to settings Select RFID Select Regulatory and make sure that under Region it ...MC333XR Scanner Setup Instructions
STEP 1: Attach the battery to the scanner STEP 2: Power the device on by pressing the red button in the lower right corner STEP 3: Connect to your WiFi network by holding down the WiFi symbol in the upper right corner of the screen ...Best Methods for Attaching RFID Tags to Vinyl Tents, Sidewalls & Inflatables
Learn the most effective ways to securely attach RFID tags to vinyl tents, sidewalls, and inflatables like bounce houses. This guide covers various techniques, including sewing, RF welding, hot air welding, HH66 vinyl cement, vinyl repair tape, and ...EASY RFID PRO APP DOWNLOADS
EASY RFID PRO V6 DOWNLOAD Version 6 APK <--- CLICK HERE TO DOWNLOAD* *Version 6 recommends that you update the firmware on your device(s). Release notes: Version 6 was built for Android 14. While it is capable of working with devices running as old ...