MC333XR Scanner Setup Instructions

MC333XR Scanner Setup Instructions

STEP 1:      Attach the battery to the scanner
STEP 2:      Power the device on by pressing the red button in the lower right corner
STEP 3:      Connect to your WiFi network by holding down the WiFi symbol in the upper right corner of the screen
STEP 4:      When a new window opens, select the WiFi symbol in the upper left corner of the window. Find your WiFi network and select it.
STEP 5:      Now that you are connected to WiFi, select the Easy RFID Pro app to launch and then sign in with your credentials.*. You are now ready to start scanning!
                  *Note: The first time you login to Easy RFID Pro, you will need to use the email address associated with your account as your username.


To download a copy of these instructions with pictures, click here.


    • Related Articles

    • ZQ630 Mobile Printer Setup Instructions

      Step 1 - Insert the battery. Step 2 - Open the protective cover on the printer and plug in the power cable. Step 3 - Open the printer to install the roll of labels.  Step 4 - Pull the media supports apart and insert label roll, then close the lid and ...

    • How to Setup a Printer (printing from your handheld device)

      Each handheld device can be setup to print to one printer at a time. These settings are stored with each user's log in profile on that specific device. The below list is a list that has been tested with the Easy RFID Pro operating on an Android ...

    • Scanner Not Connecting to the Printer via Bluetooth

      The first time you pair your scanner to the printer, you need to put the printer into discovery mode. Make sure that bluetooth is enabled on your scanner. HOW TO PUT PRINTER INTO DISCOVERY MODE: Hold down the FEED button on the printer until the ...

    • Why is my scanner not scanning RFID tags?

      If your scanner is not scanning RFID tags try these fixes: Make sure that your battery power level is above 10% Go to the 123 RFID app on your scanner (see image below) Go to settings Select RFID Select Regulatory and make sure that under Region it ...

    • Water Rating for MC333

      The MC333 scanner has a water rating of IP54.  This means the scanner can handle rain and light spills.