How do I reconnect my mobile printer to my handheld device?
STEP 1: Press the TOUCH SCAN button at the bottom of the screen
STEP 2: Select SET PRINTER
STEP 3: Turn on the printer
STEP 4: Flip over the printer and locate the Bluetooth bar code
STEP 5: Scan the barcode with your RFID reader and select PAIR PRINTER. You are now set up!
*Please note: If you turn off the printer, the reader will continue to search for this printer and may cause screen lag. If this happens, simply tap the TOUCH SCAN button, then select your printer. At the bottom of the screen, select CLEAR PRINTER. Your printer will then be removed from the device.
If you are pairing the printer to the device for the first time, click here to be directed to the initial pairing instructions.
Related Articles
ZQ630 Mobile Printer Setup Instructions
Step 1 - Insert the battery. Step 2 - Open the protective cover on the printer and plug in the power cable. Step 3 - Open the printer to install the roll of labels. Step 4 - Pull the media supports apart and insert label roll, then close the lid and ...
How to Setup a Printer (printing from your handheld device)
Each handheld device can be setup to print to one printer at a time. These settings are stored with each user's log in profile on that specific device. The below list is a list that has been tested with the Easy RFID Pro operating on an Android ...
Scanner Not Connecting to the Printer via Bluetooth
The first time you pair your scanner to the printer, you need to put the printer into discovery mode. Make sure that bluetooth is enabled on your scanner. HOW TO PUT PRINTER INTO DISCOVERY MODE: Hold down the FEED button on the printer until the ...
How to check the warranty on any Zebra device
To check the warranty status on any Zebra device, make sure you have your serial number handy. Click the link below and enter the serial number of the device. CLICK HERE TO CHECK WARRANTY
Who has access to the cloud dashboard?
Only Admins have access to the cloud account. Users can only access the data you give access to in the handheld device.