ZQ630 Mobile Printer Setup Instructions

ZQ630 Mobile Printer Setup Instructions

Step 1 - Insert the battery.

Step 2 - Open the protective cover on the printer and plug in the power cable.

Step 3 - Open the printer to install the roll of labels. 

Step 4 - Pull the media supports apart and insert label roll, then close the lid and pull the label out.

Step 5 - Turn the printer on. Once the printer is on, hold down the power button until the bluetooth symbol begins to flash in the upper left corner of the screen. Your printer is now in discovery mode.  

Step 6 - In the Easy RFID Pro app on your scanner select TOUCH SCAN then SET PRINTER. 

Step 7 - When prompted, use your device to scan the BLUETOOTH code on the bottom of your printer and your scanner and printer should automatically pair. You are now all set to start printing!


Download the attached for pictures and printed set of instructions. 

    • Related Articles

    • MC333XR Scanner Setup Instructions

      STEP 1:      Attach the battery to the scanner STEP 2:      Power the device on by pressing the red button in the lower right corner STEP 3:      Connect to your WiFi network by holding down the WiFi symbol in the upper right corner of the screen ...

    • How do I reconnect my mobile printer to my handheld device?

      STEP 1:      Press the TOUCH SCAN button at the bottom of the screen STEP 2:      Select SET PRINTER STEP 3:      Turn on the printer STEP 4:      Flip over the printer and locate the Bluetooth bar code STEP 5:      Scan the barcode with your RFID ...

    • How to Setup a Printer (printing from your handheld device)

      Each handheld device can be setup to print to one printer at a time. These settings are stored with each user's log in profile on that specific device. The below list is a list that has been tested with the Easy RFID Pro operating on an Android ...

    • Scanner Not Connecting to the Printer via Bluetooth

      The first time you pair your scanner to the printer, you need to put the printer into discovery mode. Make sure that bluetooth is enabled on your scanner. HOW TO PUT PRINTER INTO DISCOVERY MODE: Hold down the FEED button on the printer until the ...

    • EASY RFID PRO APP DOWNLOADS

      Click the link below to download the latest version of Easy RFID Pro: EASY RFID PRO V5 DOWNLOAD Version 5 APK <--- CLICK HERE TO DOWNLOAD Version 5 requires that you update the firmware on your device(s). CLICK HERE for firmware update instructions. ...