Scanner Not Connecting to the Printer via Bluetooth

Scanner Not Connecting to the Printer via Bluetooth

The first time you pair your scanner to the printer, you need to put the printer into discovery mode.
Make sure that bluetooth is enabled on your scanner.

HOW TO PUT PRINTER INTO DISCOVERY MODE:
  1. Hold down the FEED button on the printer until the bluetooth symbol flashes on the left side of the screen.
  2. On the scanner in the Easy RFID Pro app, select TOUCH SCAN - SET PRINTER.
  3. When you are in the printer field on the screen, scan the barcode for bluetooth on the bottom of the printer. Your devices should now pair.
IF DEVICES DO NOT PAIR:
  1. Close the Easy RFID Pro app 
  2. Go to SETTINGS on your scanner
  3. Find the bluetooth section (do this while printer is still in discovery mode).
  4. Select the printer. Devices should now pair. 

    • Related Articles

    • ZQ630 Mobile Printer Setup Instructions

      Step 1 - Insert the battery. Step 2 - Open the protective cover on the printer and plug in the power cable. Step 3 - Open the printer to install the roll of labels.  Step 4 - Pull the media supports apart and insert label roll, then close the lid and ...

    • How do I reconnect my mobile printer to my handheld device?

      STEP 1:      Press the TOUCH SCAN button at the bottom of the screen STEP 2:      Select SET PRINTER STEP 3:      Turn on the printer STEP 4:      Flip over the printer and locate the Bluetooth bar code STEP 5:      Scan the barcode with your RFID ...

    • MC333XR Scanner Setup Instructions

      STEP 1:      Attach the battery to the scanner STEP 2:      Power the device on by pressing the red button in the lower right corner STEP 3:      Connect to your WiFi network by holding down the WiFi symbol in the upper right corner of the screen ...

    • How to Setup a Printer (printing from your handheld device)

      Each handheld device can be setup to print to one printer at a time. These settings are stored with each user's log in profile on that specific device. The below list is a list that has been tested with the Easy RFID Pro operating on an Android ...

    • Why is my scanner not scanning RFID tags?

      If your scanner is not scanning RFID tags try these fixes: Make sure that your battery power level is above 10% Go to the 123 RFID app on your scanner (see image below) Go to settings Select RFID Select Regulatory and make sure that under Region it ...